Sash Lock Door Handles
If you're looking to increase the security of your home without compromising the aesthetics, choose door handles with sash lock. They're used with a mortice latch or sash lock and can be paired with a night latch to provide additional locking for doors inside.
The handles are made up of a handle/lever on backplates and are typically used with a three or five lever mortice lock. They can be used in conjunction with a tube latch.
double glazed sash window
There are a variety of lever handles to match any style. Rustic lever latches work well with a ranch or farmhouse style decor and are also well-liked in modern homes. Classic lever handles are round or spherical and easy to hold. They are simple, affordable and can be used with any style of home design. Choose polished or satin nickel chrome handles for a classy style. These finishes are durable and easy to clean. Other choices include antique bronze and polished brass. Many handles have a decorative design, like small amber worm eyes, or long-horned crystals. Some have a star or pin shape that is molded into the base of the lever.
To change the lever lock door handles you must have the right screwdriver, or a tool for disassembling them. Depending on the design and model, you may need to use an awl or nail to remove the lever handle. Some lever handles have an apex or notch on one side of the base which can be used to pry it open.
Follow the manufacturer's guidelines for removing your existing handles when you have the right tool. Examine the spindle of the new lever. Doors from the past might have been morticed for previous latches and locks, that require a particular spindle. Most lever handle manufacturers use a standard door handle spindle.
If you are replacing a sash lock door handle the handle that was previously used must be removed and the tubular latch bolt which sits inside the door, must be removed from the strike plate that is in the door frame. You will then need to drill a hole in the door frame, insert the latch bolt through, and connect it to the strike plate within the door frame.
When installing a new lever door handle, it is essential to know that all ADA (Americans with Disabilities Act) approved handles are designed to be operated with a hand and must not require users to tighten or turn their wrists. To meet ADA compliance standards the lever door handle must not be operated with the thumb and finger, or even the entire hand.
Sash Lock Handles
The primary function of door handles with sash locks is to pull the sashes that are moving together tightly to create a seal. This helps to maintain the temperature inside the home and prevents drafts. They are also great for doors that do not require the security of keys for locking systems.
Mortice sashlocks are locks that incorporate deadbolt and latch in one case. They are installed into the door's materials. They are used in conjunction with a pair of door handles, and there are many choices to match your home.
Lever lock handle works with a lever on a backplate cut out below, which allows a key to be inserted to open the mortice sash lock. It is typically used for doors that don't lock, such as living rooms and dining areas, but can be paired with a tubular latch for the inside of a door to make it more secure.
They are designed to hold sash together multiple times, and also have a hook that fits in the keeper. They are available in various styles and designs that are suitable for different window types such as hinged or sliding casement windows. Some are made of cast aluminium while others are brass or wrought iron. They are available in a variety of finishes to match other elements of door furniture, such as escutcheons that guard the keyhole.
3 lever sash locks are suitable for internal doors but not for external doors, as they don't offer the security level required by insurance providers. They also have lower resistance to forced entry, which makes them more vulnerable than their certificated 5 lever counterparts.
A door sash that has five levers is the best choice for exterior doors. It offers greater levels of resistance to forced entry and is harder to bypass or pick. These locks are a brand new design that has been tested and certified for compliance with stringent building, fire and disability regulations.
To replace a handle on a sash-lock take the old fastener from both ends by taking out the screws. Make sure you have a screwdriver handy and carefully separate the pieces to ensure that there is no damage. Mark the screw holes using pencil so that you can place the new fastener in the correct position when you are ready to put it in place it. Remove any dust or flickers of paint and then screw the new fastener into place. It is essential to test the handle to ensure it functions properly and forms a a tight seal.
Tubular Latch Handles
The tubular latch is an internal latch that can be operated by turning the handle. It is designed to close the door however, it doesn't lock the door like mortice locks do. They are usually employed on doors with internal doors where no locking is required. They can be equipped with knob or lever handles.
Tubular latches are available in various sizes. These range from economy through to high-end architectural quality. The dimensions of the door depend on the purpose for which it is used and whether it has a lock. For instance bathrooms may require a thumbturn and release mechanism in the event in an emergency, therefore you will need locks that are lockable.
Choosing the right latch also depends on the backset size of your door. You must select a latch that has a backset measurement that matches the distance between the edge and the centre of your door's opening for the handle rose or knob. This will ensure that your door knobs or handles operate the latch without a hitch.
If you are fitting an unsprung or sprung lever or door knob it is essential to choose a sturdy tubular latch that has a double-sprung follower and tongue. This will ensure a smooth latch operation and prevent it becoming sluggish or ineffective after prolonged use.
After you have chosen the appropriate latch for your needs the next step is to attach it on the door. The first step is to make sure that the latch is level with the top of the door frame/casing. Then mark the position of the plate and drill holes. Utilizing a countersink drill bit can help create the right recess to sit comfortably in.
Once the latch is secure, you can then screw it to the door. It is important to check that it is functioning properly prior to fitting the door handles and installing the locks, so be sure to test it by closing and opening the door several times. If the door isn't working properly try lubricating your door with WD40. Then re-try it. If you continue to experience issues, it could be necessary to consult a locksmith or a professional installer.
Keyhole Handles
Keyhole handles work with a tubular latch that is fitted to the door to allow it to be closed and opened it. The handle is able to engage the latch when pushed down and then releases it when pulled up. The handles are typically used for doors that are inside, such as those in living rooms and dining rooms. However, they can be fitted to the front door, if they are paired with the nightlatch.
Door knobs are a more contemporary type of handle that combines spring-loaded levers/handles on a square or round fixing rose with an accompanying thumb turn or escutcheon. They come in various styles and finishes to match the doors of your home. They can be utilized with Euro cylinder locks or multipoint locking systems to provide extra security to your door. This is achieved through several points of locking along the door height and requires compatible door handles with the right lock centre dimensions to fit the barrel of the cylinder.
A keyhole escutcheon is an enclosure for the door's existing keyhole that hides it from view and create a more stylish appearance to the handle. They come in both a pop on or screw on design and come in a variety of finishes that match the door handle. A recessed escutcheon, which is fitted to the edge of the door to cover the keyhole more and give it a more contemporary look, is also used.
Most of the handles discussed above are designed to work with either a mortice or sash lock mechanism. However, some of them are compatible with Euro Cylinder locks too. They are designed for uPVC door and require handles that have the Euro cylinder hole and screw holes in the backplate. These handles may also require a Euro-cylinder escutcheon or a standard escutcheon according to the use.
It is essential to understand the differences between a mortice lock or mortice lock and a tubular lock, and the compatibility requirements for each. You'll have to take into consideration the door thickness and door hinges, as well as frame reinforcements as well as the door handle backplate size, the dimensions of the lock centre and the screw centres for the cylinder.